Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Door Lock
Model Year: 2008 Model: Sequoia Doc ID: RM000001VYU005X
Title: DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT (2008 Sequoia)

REPLACEMENT

1. REPLACE TRANSMITTER BATTERY

NOTICE:

Be careful when handling each component as they are precision electronic components.

(a) Using a screwdriver with its tip wrapped in protective tape, and turn the screwdriver to disengage the cover.

NOTICE:

Do not forcibly pry up the cover.

(b) Remove the battery (lithium battery: CR2032).

NOTICE:

  • Do not push the terminals with your finger.
  • Do not forcibly pry up the battery. The terminals may be damaged.
  • Do not touch the battery with wet hands. Water may cause rust.
  • Do not touch or move any components inside the transmitter, it may interfere with the proper operation.


(c) Install a battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

NOTICE:

  • Do not bend the transmitter battery electrode during insertion.
  • Keep the transmitter cover interior free of dust and oil.

(d) Engage the cover securely.